From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sidnei at enfoldsystems.com  Wed Apr  9 10:01:18 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Wed, 9 Apr 2008 12:01:18 -0300
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
In-Reply-To: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
References: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
Message-ID: <a7a2b76b0804090801o596bc43cs810e8758d806b5f0@mail.gmail.com>

Hi Shane, sorry for taking so long to answer.

On Mon, Apr 7, 2008 at 4:19 PM, Shane Graber <sgraber at gmail.com> wrote:
> I'm getting ready to migrate three Plone 2.0.5 sites to Plone
>  2.5/Debian.  My questions are the following:
>
>  1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
>  well as Plone 2.5?

We have tested as far as Plone 2.1, but not Plone 2.0.5.

>  2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
>  content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
>  site and into a Plone 2.5 site and keep all of the metadata intact?
>  (i.e. Title, Description, id, workflow)

Yes and No. Only the file content will be transferred on a default
setup. But if you configure the Marshaller Registry to use ATXML on
both sites, then it could work. We have used ATXML to import content
in the past, though not using Enfold Desktop. Let us know if you get
it working so we can spread the word.

>  I'm contemplating this route as it would allow me to start w/ a fresh
>  Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
>  Thanks!

Thank you!

-- 
Sidnei da Silva
Enfold Systems http://enfoldsystems.com
Fax +1 832 201 8856 Office +1 713 942 2377 Ext 214

From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sidnei at enfoldsystems.com  Wed Apr  9 10:01:18 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Wed, 9 Apr 2008 12:01:18 -0300
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
In-Reply-To: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
References: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
Message-ID: <a7a2b76b0804090801o596bc43cs810e8758d806b5f0@mail.gmail.com>

Hi Shane, sorry for taking so long to answer.

On Mon, Apr 7, 2008 at 4:19 PM, Shane Graber <sgraber at gmail.com> wrote:
> I'm getting ready to migrate three Plone 2.0.5 sites to Plone
>  2.5/Debian.  My questions are the following:
>
>  1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
>  well as Plone 2.5?

We have tested as far as Plone 2.1, but not Plone 2.0.5.

>  2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
>  content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
>  site and into a Plone 2.5 site and keep all of the metadata intact?
>  (i.e. Title, Description, id, workflow)

Yes and No. Only the file content will be transferred on a default
setup. But if you configure the Marshaller Registry to use ATXML on
both sites, then it could work. We have used ATXML to import content
in the past, though not using Enfold Desktop. Let us know if you get
it working so we can spread the word.

>  I'm contemplating this route as it would allow me to start w/ a fresh
>  Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
>  Thanks!

Thank you!

-- 
Sidnei da Silva
Enfold Systems http://enfoldsystems.com
Fax +1 832 201 8856 Office +1 713 942 2377 Ext 214


From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sidnei at enfoldsystems.com  Wed Apr  9 10:01:18 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Wed, 9 Apr 2008 12:01:18 -0300
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
In-Reply-To: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
References: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
Message-ID: <a7a2b76b0804090801o596bc43cs810e8758d806b5f0@mail.gmail.com>

Hi Shane, sorry for taking so long to answer.

On Mon, Apr 7, 2008 at 4:19 PM, Shane Graber <sgraber at gmail.com> wrote:
> I'm getting ready to migrate three Plone 2.0.5 sites to Plone
>  2.5/Debian.  My questions are the following:
>
>  1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
>  well as Plone 2.5?

We have tested as far as Plone 2.1, but not Plone 2.0.5.

>  2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
>  content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
>  site and into a Plone 2.5 site and keep all of the metadata intact?
>  (i.e. Title, Description, id, workflow)

Yes and No. Only the file content will be transferred on a default
setup. But if you configure the Marshaller Registry to use ATXML on
both sites, then it could work. We have used ATXML to import content
in the past, though not using Enfold Desktop. Let us know if you get
it working so we can spread the word.

>  I'm contemplating this route as it would allow me to start w/ a fresh
>  Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
>  Thanks!

Thank you!

-- 
Sidnei da Silva
Enfold Systems http://enfoldsystems.com
Fax +1 832 201 8856 Office +1 713 942 2377 Ext 214


From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sidnei at enfoldsystems.com  Wed Apr  9 10:01:18 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Wed, 9 Apr 2008 12:01:18 -0300
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
In-Reply-To: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
References: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
Message-ID: <a7a2b76b0804090801o596bc43cs810e8758d806b5f0@mail.gmail.com>

Hi Shane, sorry for taking so long to answer.

On Mon, Apr 7, 2008 at 4:19 PM, Shane Graber <sgraber at gmail.com> wrote:
> I'm getting ready to migrate three Plone 2.0.5 sites to Plone
>  2.5/Debian.  My questions are the following:
>
>  1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
>  well as Plone 2.5?

We have tested as far as Plone 2.1, but not Plone 2.0.5.

>  2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
>  content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
>  site and into a Plone 2.5 site and keep all of the metadata intact?
>  (i.e. Title, Description, id, workflow)

Yes and No. Only the file content will be transferred on a default
setup. But if you configure the Marshaller Registry to use ATXML on
both sites, then it could work. We have used ATXML to import content
in the past, though not using Enfold Desktop. Let us know if you get
it working so we can spread the word.

>  I'm contemplating this route as it would allow me to start w/ a fresh
>  Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
>  Thanks!

Thank you!

-- 
Sidnei da Silva
Enfold Systems http://enfoldsystems.com
Fax +1 832 201 8856 Office +1 713 942 2377 Ext 214


From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sidnei at enfoldsystems.com  Wed Apr  9 10:01:18 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Wed, 9 Apr 2008 12:01:18 -0300
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
In-Reply-To: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
References: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
Message-ID: <a7a2b76b0804090801o596bc43cs810e8758d806b5f0@mail.gmail.com>

Hi Shane, sorry for taking so long to answer.

On Mon, Apr 7, 2008 at 4:19 PM, Shane Graber <sgraber at gmail.com> wrote:
> I'm getting ready to migrate three Plone 2.0.5 sites to Plone
>  2.5/Debian.  My questions are the following:
>
>  1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
>  well as Plone 2.5?

We have tested as far as Plone 2.1, but not Plone 2.0.5.

>  2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
>  content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
>  site and into a Plone 2.5 site and keep all of the metadata intact?
>  (i.e. Title, Description, id, workflow)

Yes and No. Only the file content will be transferred on a default
setup. But if you configure the Marshaller Registry to use ATXML on
both sites, then it could work. We have used ATXML to import content
in the past, though not using Enfold Desktop. Let us know if you get
it working so we can spread the word.

>  I'm contemplating this route as it would allow me to start w/ a fresh
>  Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
>  Thanks!

Thank you!

-- 
Sidnei da Silva
Enfold Systems http://enfoldsystems.com
Fax +1 832 201 8856 Office +1 713 942 2377 Ext 214


From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sidnei at enfoldsystems.com  Wed Apr  9 10:01:18 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Wed, 9 Apr 2008 12:01:18 -0300
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
In-Reply-To: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
References: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
Message-ID: <a7a2b76b0804090801o596bc43cs810e8758d806b5f0@mail.gmail.com>

Hi Shane, sorry for taking so long to answer.

On Mon, Apr 7, 2008 at 4:19 PM, Shane Graber <sgraber at gmail.com> wrote:
> I'm getting ready to migrate three Plone 2.0.5 sites to Plone
>  2.5/Debian.  My questions are the following:
>
>  1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
>  well as Plone 2.5?

We have tested as far as Plone 2.1, but not Plone 2.0.5.

>  2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
>  content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
>  site and into a Plone 2.5 site and keep all of the metadata intact?
>  (i.e. Title, Description, id, workflow)

Yes and No. Only the file content will be transferred on a default
setup. But if you configure the Marshaller Registry to use ATXML on
both sites, then it could work. We have used ATXML to import content
in the past, though not using Enfold Desktop. Let us know if you get
it working so we can spread the word.

>  I'm contemplating this route as it would allow me to start w/ a fresh
>  Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
>  Thanks!

Thank you!

-- 
Sidnei da Silva
Enfold Systems http://enfoldsystems.com
Fax +1 832 201 8856 Office +1 713 942 2377 Ext 214


From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sidnei at enfoldsystems.com  Wed Apr  9 10:01:18 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Wed, 9 Apr 2008 12:01:18 -0300
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
In-Reply-To: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
References: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
Message-ID: <a7a2b76b0804090801o596bc43cs810e8758d806b5f0@mail.gmail.com>

Hi Shane, sorry for taking so long to answer.

On Mon, Apr 7, 2008 at 4:19 PM, Shane Graber <sgraber at gmail.com> wrote:
> I'm getting ready to migrate three Plone 2.0.5 sites to Plone
>  2.5/Debian.  My questions are the following:
>
>  1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
>  well as Plone 2.5?

We have tested as far as Plone 2.1, but not Plone 2.0.5.

>  2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
>  content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
>  site and into a Plone 2.5 site and keep all of the metadata intact?
>  (i.e. Title, Description, id, workflow)

Yes and No. Only the file content will be transferred on a default
setup. But if you configure the Marshaller Registry to use ATXML on
both sites, then it could work. We have used ATXML to import content
in the past, though not using Enfold Desktop. Let us know if you get
it working so we can spread the word.

>  I'm contemplating this route as it would allow me to start w/ a fresh
>  Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
>  Thanks!

Thank you!

-- 
Sidnei da Silva
Enfold Systems http://enfoldsystems.com
Fax +1 832 201 8856 Office +1 713 942 2377 Ext 214


From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sidnei at enfoldsystems.com  Wed Apr  9 10:01:18 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Wed, 9 Apr 2008 12:01:18 -0300
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
In-Reply-To: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
References: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
Message-ID: <a7a2b76b0804090801o596bc43cs810e8758d806b5f0@mail.gmail.com>

Hi Shane, sorry for taking so long to answer.

On Mon, Apr 7, 2008 at 4:19 PM, Shane Graber <sgraber at gmail.com> wrote:
> I'm getting ready to migrate three Plone 2.0.5 sites to Plone
>  2.5/Debian.  My questions are the following:
>
>  1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
>  well as Plone 2.5?

We have tested as far as Plone 2.1, but not Plone 2.0.5.

>  2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
>  content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
>  site and into a Plone 2.5 site and keep all of the metadata intact?
>  (i.e. Title, Description, id, workflow)

Yes and No. Only the file content will be transferred on a default
setup. But if you configure the Marshaller Registry to use ATXML on
both sites, then it could work. We have used ATXML to import content
in the past, though not using Enfold Desktop. Let us know if you get
it working so we can spread the word.

>  I'm contemplating this route as it would allow me to start w/ a fresh
>  Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
>  Thanks!

Thank you!

-- 
Sidnei da Silva
Enfold Systems http://enfoldsystems.com
Fax +1 832 201 8856 Office +1 713 942 2377 Ext 214


From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sidnei at enfoldsystems.com  Wed Apr  9 10:01:18 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Wed, 9 Apr 2008 12:01:18 -0300
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
In-Reply-To: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
References: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
Message-ID: <a7a2b76b0804090801o596bc43cs810e8758d806b5f0@mail.gmail.com>

Hi Shane, sorry for taking so long to answer.

On Mon, Apr 7, 2008 at 4:19 PM, Shane Graber <sgraber at gmail.com> wrote:
> I'm getting ready to migrate three Plone 2.0.5 sites to Plone
>  2.5/Debian.  My questions are the following:
>
>  1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
>  well as Plone 2.5?

We have tested as far as Plone 2.1, but not Plone 2.0.5.

>  2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
>  content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
>  site and into a Plone 2.5 site and keep all of the metadata intact?
>  (i.e. Title, Description, id, workflow)

Yes and No. Only the file content will be transferred on a default
setup. But if you configure the Marshaller Registry to use ATXML on
both sites, then it could work. We have used ATXML to import content
in the past, though not using Enfold Desktop. Let us know if you get
it working so we can spread the word.

>  I'm contemplating this route as it would allow me to start w/ a fresh
>  Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
>  Thanks!

Thank you!

-- 
Sidnei da Silva
Enfold Systems http://enfoldsystems.com
Fax +1 832 201 8856 Office +1 713 942 2377 Ext 214


From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sidnei at enfoldsystems.com  Wed Apr  9 10:01:18 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Wed, 9 Apr 2008 12:01:18 -0300
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
In-Reply-To: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
References: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
Message-ID: <a7a2b76b0804090801o596bc43cs810e8758d806b5f0@mail.gmail.com>

Hi Shane, sorry for taking so long to answer.

On Mon, Apr 7, 2008 at 4:19 PM, Shane Graber <sgraber at gmail.com> wrote:
> I'm getting ready to migrate three Plone 2.0.5 sites to Plone
>  2.5/Debian.  My questions are the following:
>
>  1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
>  well as Plone 2.5?

We have tested as far as Plone 2.1, but not Plone 2.0.5.

>  2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
>  content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
>  site and into a Plone 2.5 site and keep all of the metadata intact?
>  (i.e. Title, Description, id, workflow)

Yes and No. Only the file content will be transferred on a default
setup. But if you configure the Marshaller Registry to use ATXML on
both sites, then it could work. We have used ATXML to import content
in the past, though not using Enfold Desktop. Let us know if you get
it working so we can spread the word.

>  I'm contemplating this route as it would allow me to start w/ a fresh
>  Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
>  Thanks!

Thank you!

-- 
Sidnei da Silva
Enfold Systems http://enfoldsystems.com
Fax +1 832 201 8856 Office +1 713 942 2377 Ext 214


From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sidnei at enfoldsystems.com  Wed Apr  9 10:01:18 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Wed, 9 Apr 2008 12:01:18 -0300
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
In-Reply-To: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
References: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
Message-ID: <a7a2b76b0804090801o596bc43cs810e8758d806b5f0@mail.gmail.com>

Hi Shane, sorry for taking so long to answer.

On Mon, Apr 7, 2008 at 4:19 PM, Shane Graber <sgraber at gmail.com> wrote:
> I'm getting ready to migrate three Plone 2.0.5 sites to Plone
>  2.5/Debian.  My questions are the following:
>
>  1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
>  well as Plone 2.5?

We have tested as far as Plone 2.1, but not Plone 2.0.5.

>  2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
>  content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
>  site and into a Plone 2.5 site and keep all of the metadata intact?
>  (i.e. Title, Description, id, workflow)

Yes and No. Only the file content will be transferred on a default
setup. But if you configure the Marshaller Registry to use ATXML on
both sites, then it could work. We have used ATXML to import content
in the past, though not using Enfold Desktop. Let us know if you get
it working so we can spread the word.

>  I'm contemplating this route as it would allow me to start w/ a fresh
>  Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
>  Thanks!

Thank you!

-- 
Sidnei da Silva
Enfold Systems http://enfoldsystems.com
Fax +1 832 201 8856 Office +1 713 942 2377 Ext 214


From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sidnei at enfoldsystems.com  Wed Apr  9 10:01:18 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Wed, 9 Apr 2008 12:01:18 -0300
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
In-Reply-To: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
References: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
Message-ID: <a7a2b76b0804090801o596bc43cs810e8758d806b5f0@mail.gmail.com>

Hi Shane, sorry for taking so long to answer.

On Mon, Apr 7, 2008 at 4:19 PM, Shane Graber <sgraber at gmail.com> wrote:
> I'm getting ready to migrate three Plone 2.0.5 sites to Plone
>  2.5/Debian.  My questions are the following:
>
>  1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
>  well as Plone 2.5?

We have tested as far as Plone 2.1, but not Plone 2.0.5.

>  2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
>  content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
>  site and into a Plone 2.5 site and keep all of the metadata intact?
>  (i.e. Title, Description, id, workflow)

Yes and No. Only the file content will be transferred on a default
setup. But if you configure the Marshaller Registry to use ATXML on
both sites, then it could work. We have used ATXML to import content
in the past, though not using Enfold Desktop. Let us know if you get
it working so we can spread the word.

>  I'm contemplating this route as it would allow me to start w/ a fresh
>  Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
>  Thanks!

Thank you!

-- 
Sidnei da Silva
Enfold Systems http://enfoldsystems.com
Fax +1 832 201 8856 Office +1 713 942 2377 Ext 214


From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sidnei at enfoldsystems.com  Wed Apr  9 10:01:18 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Wed, 9 Apr 2008 12:01:18 -0300
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
In-Reply-To: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
References: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
Message-ID: <a7a2b76b0804090801o596bc43cs810e8758d806b5f0@mail.gmail.com>

Hi Shane, sorry for taking so long to answer.

On Mon, Apr 7, 2008 at 4:19 PM, Shane Graber <sgraber at gmail.com> wrote:
> I'm getting ready to migrate three Plone 2.0.5 sites to Plone
>  2.5/Debian.  My questions are the following:
>
>  1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
>  well as Plone 2.5?

We have tested as far as Plone 2.1, but not Plone 2.0.5.

>  2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
>  content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
>  site and into a Plone 2.5 site and keep all of the metadata intact?
>  (i.e. Title, Description, id, workflow)

Yes and No. Only the file content will be transferred on a default
setup. But if you configure the Marshaller Registry to use ATXML on
both sites, then it could work. We have used ATXML to import content
in the past, though not using Enfold Desktop. Let us know if you get
it working so we can spread the word.

>  I'm contemplating this route as it would allow me to start w/ a fresh
>  Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
>  Thanks!

Thank you!

-- 
Sidnei da Silva
Enfold Systems http://enfoldsystems.com
Fax +1 832 201 8856 Office +1 713 942 2377 Ext 214


From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sidnei at enfoldsystems.com  Wed Apr  9 10:01:18 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Wed, 9 Apr 2008 12:01:18 -0300
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
In-Reply-To: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
References: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
Message-ID: <a7a2b76b0804090801o596bc43cs810e8758d806b5f0@mail.gmail.com>

Hi Shane, sorry for taking so long to answer.

On Mon, Apr 7, 2008 at 4:19 PM, Shane Graber <sgraber at gmail.com> wrote:
> I'm getting ready to migrate three Plone 2.0.5 sites to Plone
>  2.5/Debian.  My questions are the following:
>
>  1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
>  well as Plone 2.5?

We have tested as far as Plone 2.1, but not Plone 2.0.5.

>  2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
>  content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
>  site and into a Plone 2.5 site and keep all of the metadata intact?
>  (i.e. Title, Description, id, workflow)

Yes and No. Only the file content will be transferred on a default
setup. But if you configure the Marshaller Registry to use ATXML on
both sites, then it could work. We have used ATXML to import content
in the past, though not using Enfold Desktop. Let us know if you get
it working so we can spread the word.

>  I'm contemplating this route as it would allow me to start w/ a fresh
>  Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
>  Thanks!

Thank you!

-- 
Sidnei da Silva
Enfold Systems http://enfoldsystems.com
Fax +1 832 201 8856 Office +1 713 942 2377 Ext 214


From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sidnei at enfoldsystems.com  Wed Apr  9 10:01:18 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Wed, 9 Apr 2008 12:01:18 -0300
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
In-Reply-To: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
References: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
Message-ID: <a7a2b76b0804090801o596bc43cs810e8758d806b5f0@mail.gmail.com>

Hi Shane, sorry for taking so long to answer.

On Mon, Apr 7, 2008 at 4:19 PM, Shane Graber <sgraber at gmail.com> wrote:
> I'm getting ready to migrate three Plone 2.0.5 sites to Plone
>  2.5/Debian.  My questions are the following:
>
>  1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
>  well as Plone 2.5?

We have tested as far as Plone 2.1, but not Plone 2.0.5.

>  2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
>  content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
>  site and into a Plone 2.5 site and keep all of the metadata intact?
>  (i.e. Title, Description, id, workflow)

Yes and No. Only the file content will be transferred on a default
setup. But if you configure the Marshaller Registry to use ATXML on
both sites, then it could work. We have used ATXML to import content
in the past, though not using Enfold Desktop. Let us know if you get
it working so we can spread the word.

>  I'm contemplating this route as it would allow me to start w/ a fresh
>  Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
>  Thanks!

Thank you!

-- 
Sidnei da Silva
Enfold Systems http://enfoldsystems.com
Fax +1 832 201 8856 Office +1 713 942 2377 Ext 214


From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sidnei at enfoldsystems.com  Wed Apr  9 10:01:18 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Wed, 9 Apr 2008 12:01:18 -0300
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
In-Reply-To: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
References: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
Message-ID: <a7a2b76b0804090801o596bc43cs810e8758d806b5f0@mail.gmail.com>

Hi Shane, sorry for taking so long to answer.

On Mon, Apr 7, 2008 at 4:19 PM, Shane Graber <sgraber at gmail.com> wrote:
> I'm getting ready to migrate three Plone 2.0.5 sites to Plone
>  2.5/Debian.  My questions are the following:
>
>  1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
>  well as Plone 2.5?

We have tested as far as Plone 2.1, but not Plone 2.0.5.

>  2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
>  content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
>  site and into a Plone 2.5 site and keep all of the metadata intact?
>  (i.e. Title, Description, id, workflow)

Yes and No. Only the file content will be transferred on a default
setup. But if you configure the Marshaller Registry to use ATXML on
both sites, then it could work. We have used ATXML to import content
in the past, though not using Enfold Desktop. Let us know if you get
it working so we can spread the word.

>  I'm contemplating this route as it would allow me to start w/ a fresh
>  Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
>  Thanks!

Thank you!

-- 
Sidnei da Silva
Enfold Systems http://enfoldsystems.com
Fax +1 832 201 8856 Office +1 713 942 2377 Ext 214


From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sidnei at enfoldsystems.com  Wed Apr  9 10:01:18 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Wed, 9 Apr 2008 12:01:18 -0300
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
In-Reply-To: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
References: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
Message-ID: <a7a2b76b0804090801o596bc43cs810e8758d806b5f0@mail.gmail.com>

Hi Shane, sorry for taking so long to answer.

On Mon, Apr 7, 2008 at 4:19 PM, Shane Graber <sgraber at gmail.com> wrote:
> I'm getting ready to migrate three Plone 2.0.5 sites to Plone
>  2.5/Debian.  My questions are the following:
>
>  1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
>  well as Plone 2.5?

We have tested as far as Plone 2.1, but not Plone 2.0.5.

>  2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
>  content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
>  site and into a Plone 2.5 site and keep all of the metadata intact?
>  (i.e. Title, Description, id, workflow)

Yes and No. Only the file content will be transferred on a default
setup. But if you configure the Marshaller Registry to use ATXML on
both sites, then it could work. We have used ATXML to import content
in the past, though not using Enfold Desktop. Let us know if you get
it working so we can spread the word.

>  I'm contemplating this route as it would allow me to start w/ a fresh
>  Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
>  Thanks!

Thank you!

-- 
Sidnei da Silva
Enfold Systems http://enfoldsystems.com
Fax +1 832 201 8856 Office +1 713 942 2377 Ext 214


From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sidnei at enfoldsystems.com  Wed Apr  9 10:01:18 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Wed, 9 Apr 2008 12:01:18 -0300
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
In-Reply-To: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
References: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
Message-ID: <a7a2b76b0804090801o596bc43cs810e8758d806b5f0@mail.gmail.com>

Hi Shane, sorry for taking so long to answer.

On Mon, Apr 7, 2008 at 4:19 PM, Shane Graber <sgraber at gmail.com> wrote:
> I'm getting ready to migrate three Plone 2.0.5 sites to Plone
>  2.5/Debian.  My questions are the following:
>
>  1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
>  well as Plone 2.5?

We have tested as far as Plone 2.1, but not Plone 2.0.5.

>  2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
>  content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
>  site and into a Plone 2.5 site and keep all of the metadata intact?
>  (i.e. Title, Description, id, workflow)

Yes and No. Only the file content will be transferred on a default
setup. But if you configure the Marshaller Registry to use ATXML on
both sites, then it could work. We have used ATXML to import content
in the past, though not using Enfold Desktop. Let us know if you get
it working so we can spread the word.

>  I'm contemplating this route as it would allow me to start w/ a fresh
>  Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
>  Thanks!

Thank you!

-- 
Sidnei da Silva
Enfold Systems http://enfoldsystems.com
Fax +1 832 201 8856 Office +1 713 942 2377 Ext 214


From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sidnei at enfoldsystems.com  Wed Apr  9 10:01:18 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Wed, 9 Apr 2008 12:01:18 -0300
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
In-Reply-To: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
References: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
Message-ID: <a7a2b76b0804090801o596bc43cs810e8758d806b5f0@mail.gmail.com>

Hi Shane, sorry for taking so long to answer.

On Mon, Apr 7, 2008 at 4:19 PM, Shane Graber <sgraber at gmail.com> wrote:
> I'm getting ready to migrate three Plone 2.0.5 sites to Plone
>  2.5/Debian.  My questions are the following:
>
>  1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
>  well as Plone 2.5?

We have tested as far as Plone 2.1, but not Plone 2.0.5.

>  2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
>  content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
>  site and into a Plone 2.5 site and keep all of the metadata intact?
>  (i.e. Title, Description, id, workflow)

Yes and No. Only the file content will be transferred on a default
setup. But if you configure the Marshaller Registry to use ATXML on
both sites, then it could work. We have used ATXML to import content
in the past, though not using Enfold Desktop. Let us know if you get
it working so we can spread the word.

>  I'm contemplating this route as it would allow me to start w/ a fresh
>  Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
>  Thanks!

Thank you!

-- 
Sidnei da Silva
Enfold Systems http://enfoldsystems.com
Fax +1 832 201 8856 Office +1 713 942 2377 Ext 214


From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sidnei at enfoldsystems.com  Wed Apr  9 10:01:18 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Wed, 9 Apr 2008 12:01:18 -0300
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
In-Reply-To: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
References: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
Message-ID: <a7a2b76b0804090801o596bc43cs810e8758d806b5f0@mail.gmail.com>

Hi Shane, sorry for taking so long to answer.

On Mon, Apr 7, 2008 at 4:19 PM, Shane Graber <sgraber at gmail.com> wrote:
> I'm getting ready to migrate three Plone 2.0.5 sites to Plone
>  2.5/Debian.  My questions are the following:
>
>  1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
>  well as Plone 2.5?

We have tested as far as Plone 2.1, but not Plone 2.0.5.

>  2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
>  content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
>  site and into a Plone 2.5 site and keep all of the metadata intact?
>  (i.e. Title, Description, id, workflow)

Yes and No. Only the file content will be transferred on a default
setup. But if you configure the Marshaller Registry to use ATXML on
both sites, then it could work. We have used ATXML to import content
in the past, though not using Enfold Desktop. Let us know if you get
it working so we can spread the word.

>  I'm contemplating this route as it would allow me to start w/ a fresh
>  Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
>  Thanks!

Thank you!

-- 
Sidnei da Silva
Enfold Systems http://enfoldsystems.com
Fax +1 832 201 8856 Office +1 713 942 2377 Ext 214


From cbc at unc.edu  Mon Apr 28 14:21:45 2008
From: cbc at unc.edu (Chris Calloway)
Date: Mon, 28 Apr 2008 15:21:45 -0400
Subject: [Community-desktop] Error artifacts left after uninstall of Enfold
	Desktop
Message-ID: <481623C9.8050606@unc.edu>

I'm trying to migrate a Plone site. To that end, I'm uninstalling third 
party products. This is the same site I've been trying to migrate for 
months and have talked to you about before (I thank you for that help). 
I work on trying the migration for a few days, then have to go work on 
other stuff for awhile and come back to the migration attempts later. I 
run into some problems with ShellExServer in these attempts every time. 
I get a little father each time. This time I'm almost there, I think. I 
hope.

This is a Plone 2.5.2-1 site with desktop-server-3.0.0-6461-py24, python 
2.4.4., and Zope 2.9.7.

I have uninstalled all Enfold Desktop bundled products with Plone 
Add/Remove Products and have eliminated them from the Products directory 
as well. So now my Products directory looks like Plone out of the box:

Archetypes
ATContentTypes
ATReferenceBrowserWidget
CacheFu
CMFActionIcons
CMFCalendar
CMFCore
CMFDefault
CMFDynamicViewFTI
CMFFormController
CMFPlacefulWorkflow
CMFPlone
CMFQuickInstallerTool
CMFSetup
CMFTopic
CMFUid
CONTENTS.txt
DCWorkflow
ExtendedPathIndex
ExternalEditor
GenericSetup
GroupUserFolder
kupu
Marshall
MimetypesRegistry
PasswordResetTool
PlacelessTranslationService
PloneErrorReporting
PloneLanguageTool
PlonePAS
PloneTestCase
PloneTranslations
PluggableAuthService
PasswordResetToolPluginRegistry
PortalTransforms
README.txt
ResourceRegistries
SecureMailHost
statusmessages
validation

The first time I access the site after completely eliminating Enfold 
Desktop, I get these two event.log entries:

------
2008-04-28T14:16:35 WARNING ZODB Could not import class 
'EnvironmentSuppressAccessRule' from module 'Products.ShellExServer.utils'
------
2008-04-28T14:16:35 WARNING ZODB Could not import class 'Normalizer' 
from module 'Products.ShellExServer.normalize'
------

At the same time I get *three* of these:

------
2008-04-28T14:50:32 ERROR root Exception while rendering an error message
Traceback (most recent call last):
   File "/usr/local/Zope-2.9.7/lib/python/OFS/SimpleItem.py", line 223, 
in raise_standardErrorMessage
     v = s(**kwargs)
   File 
"/usr/local/Zope-2.9.7/lib/python/Shared/DC/Scripts/Bindings.py", line 
311, in __call__
     return self._bindAndExec(args, kw, None)
   File 
"/usr/local/Zope-2.9.7/lib/python/Shared/DC/Scripts/Bindings.py", line 
348, in _bindAndExec
     return self._exec(bound_data, args, kw)
   File 
"/usr/local/Zope-2.9.7/lib/python/Products/PythonScripts/PythonScript.py", 
line 326, in _exec
     result = f(*args, **kw)
   File "Script (Python)", line 1, in standard_error_message
   File "/usr/local/Zope-2.9.7/lib/python/AccessControl/ZopeGuards.py", 
line 286, in guarded_import
     raise ImportError, 'import of "%s" is unauthorized' % mname
ImportError: import of "Products.ShellExServer.utils" is unauthorized
------

And then on *every* page access I get *several* of the following:

------
2008-04-28T14:16:37 ERROR MultiHook '__before_publishing_traverse__' 
call <EnvironmentSuppressAccessRule at broken> failed.
Traceback (most recent call last):
   File "/usr/local/Zope-2.9.7/lib/python/ZPublisher/BeforeTraverse.py", 
line 104, in __call__
     cob(container, request)
TypeError: 'EnvironmentSuppressAccessRule' object is not callable
------

So, I'm wondering, why am I still getting references to ShellExServer 
modules and classes after uninstalling and removing ShellExServer? Was 
something monkey patched when I installed ShellExServer? How am I 
getting out of this forest?

-- 
Sincerely,

Chris Calloway
http://www.secoora.org
office: 332 Chapman Hall   phone: (919) 599-3530
mail: Campus Box #3300, UNC-CH, Chapel Hill, NC 27599




From sidnei at enfoldsystems.com  Mon Apr 28 15:09:21 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Mon, 28 Apr 2008 17:09:21 -0300
Subject: [Community-desktop] Error artifacts left after uninstall of
	Enfold Desktop
In-Reply-To: <481623C9.8050606@unc.edu>
References: <481623C9.8050606@unc.edu>
Message-ID: <a7a2b76b0804281309s8c3e445m1b65381a780b9637@mail.gmail.com>

Doesn't look like you did uninstall ShellExServer before removing it
from the products directory. *OR* it could be a uninstall bug that we
fixed after r6461.

On Mon, Apr 28, 2008 at 4:21 PM, Chris Calloway <cbc at unc.edu> wrote:
> I'm trying to migrate a Plone site. To that end, I'm uninstalling third
>  party products. This is the same site I've been trying to migrate for
>  months and have talked to you about before (I thank you for that help).
>  I work on trying the migration for a few days, then have to go work on
>  other stuff for awhile and come back to the migration attempts later. I
>  run into some problems with ShellExServer in these attempts every time.
>  I get a little father each time. This time I'm almost there, I think. I
>  hope.
>
>  This is a Plone 2.5.2-1 site with desktop-server-3.0.0-6461-py24, python
>  2.4.4., and Zope 2.9.7.
>
>  I have uninstalled all Enfold Desktop bundled products with Plone
>  Add/Remove Products and have eliminated them from the Products directory
>  as well. So now my Products directory looks like Plone out of the box:
>
>  Archetypes
>  ATContentTypes
>  ATReferenceBrowserWidget
>  CacheFu
>  CMFActionIcons
>  CMFCalendar
>  CMFCore
>  CMFDefault
>  CMFDynamicViewFTI
>  CMFFormController
>  CMFPlacefulWorkflow
>  CMFPlone
>  CMFQuickInstallerTool
>  CMFSetup
>  CMFTopic
>  CMFUid
>  CONTENTS.txt
>  DCWorkflow
>  ExtendedPathIndex
>  ExternalEditor
>  GenericSetup
>  GroupUserFolder
>  kupu
>  Marshall
>  MimetypesRegistry
>  PasswordResetTool
>  PlacelessTranslationService
>  PloneErrorReporting
>  PloneLanguageTool
>  PlonePAS
>  PloneTestCase
>  PloneTranslations
>  PluggableAuthService
>  PasswordResetToolPluginRegistry
>  PortalTransforms
>  README.txt
>  ResourceRegistries
>  SecureMailHost
>  statusmessages
>  validation
>
>  The first time I access the site after completely eliminating Enfold
>  Desktop, I get these two event.log entries:
>
>  ------
>  2008-04-28T14:16:35 WARNING ZODB Could not import class
>  'EnvironmentSuppressAccessRule' from module 'Products.ShellExServer.utils'
>  ------
>  2008-04-28T14:16:35 WARNING ZODB Could not import class 'Normalizer'
>  from module 'Products.ShellExServer.normalize'
>  ------
>
>  At the same time I get *three* of these:
>
>  ------
>  2008-04-28T14:50:32 ERROR root Exception while rendering an error message
>  Traceback (most recent call last):
>    File "/usr/local/Zope-2.9.7/lib/python/OFS/SimpleItem.py", line 223,
>  in raise_standardErrorMessage
>      v = s(**kwargs)
>    File
>  "/usr/local/Zope-2.9.7/lib/python/Shared/DC/Scripts/Bindings.py", line
>  311, in __call__
>      return self._bindAndExec(args, kw, None)
>    File
>  "/usr/local/Zope-2.9.7/lib/python/Shared/DC/Scripts/Bindings.py", line
>  348, in _bindAndExec
>      return self._exec(bound_data, args, kw)
>    File
>  "/usr/local/Zope-2.9.7/lib/python/Products/PythonScripts/PythonScript.py",
>  line 326, in _exec
>      result = f(*args, **kw)
>    File "Script (Python)", line 1, in standard_error_message
>    File "/usr/local/Zope-2.9.7/lib/python/AccessControl/ZopeGuards.py",
>  line 286, in guarded_import
>      raise ImportError, 'import of "%s" is unauthorized' % mname
>  ImportError: import of "Products.ShellExServer.utils" is unauthorized
>  ------
>
>  And then on *every* page access I get *several* of the following:
>
>  ------
>  2008-04-28T14:16:37 ERROR MultiHook '__before_publishing_traverse__'
>  call <EnvironmentSuppressAccessRule at broken> failed.
>  Traceback (most recent call last):
>    File "/usr/local/Zope-2.9.7/lib/python/ZPublisher/BeforeTraverse.py",
>  line 104, in __call__
>      cob(container, request)
>  TypeError: 'EnvironmentSuppressAccessRule' object is not callable
>  ------
>
>  So, I'm wondering, why am I still getting references to ShellExServer
>  modules and classes after uninstalling and removing ShellExServer? Was
>  something monkey patched when I installed ShellExServer? How am I
>  getting out of this forest?
>
>  --
>  Sincerely,
>
>  Chris Calloway
>  http://www.secoora.org
>  office: 332 Chapman Hall   phone: (919) 599-3530
>  mail: Campus Box #3300, UNC-CH, Chapel Hill, NC 27599
>
>
>
>  _______________________________________________
>  Community-desktop mailing list
>  Community-desktop at lists.enfoldsystems.com
>  http://lists.enfoldsystems.com/mailman/listinfo/community-desktop
>



-- 
Sidnei da Silva
Enfold Systems                http://enfoldsystems.com
Fax +1 832 201 8856     Office +1 713 942 2377 Ext 214

From cbc at unc.edu  Mon Apr 28 16:38:42 2008
From: cbc at unc.edu (Chris Calloway)
Date: Mon, 28 Apr 2008 17:38:42 -0400
Subject: [Community-desktop] Error artifacts left after uninstall of
 Enfold Desktop
In-Reply-To: <a7a2b76b0804281309s8c3e445m1b65381a780b9637@mail.gmail.com>
References: <481623C9.8050606@unc.edu>
	<a7a2b76b0804281309s8c3e445m1b65381a780b9637@mail.gmail.com>
Message-ID: <481643E2.9050205@unc.edu>

On 4/28/2008 4:09 PM, Sidnei da Silva wrote:
> Doesn't look like you did uninstall ShellExServer before removing it
> from the products directory. *OR* it could be a uninstall bug that we
> fixed after r6461.

Please accept my word that I did indeed uninstall Desktop Server 
products in Plone, stopped Zope, and removed the directories from 
Products in that order as described in my more recent email to this 
list. I didn't start installing or uninstalling Plone products yesterday 
and full well know the consequences of removing a product's directory 
before uninstalling a product.

Is there an uninstall bug in ED 3.0.0 fixed after r6461? I just went to 
enfoldsystems.com to download whatever the latest ED 3.0.0 would be and 
it gave me r6461 again.

-- 
Sincerely,

Chris Calloway
http://www.secoora.org
office: 332 Chapman Hall   phone: (919) 599-3530
mail: Campus Box #3300, UNC-CH, Chapel Hill, NC 27599




From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sidnei at enfoldsystems.com  Wed Apr  9 10:01:18 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Wed, 9 Apr 2008 12:01:18 -0300
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
In-Reply-To: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
References: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
Message-ID: <a7a2b76b0804090801o596bc43cs810e8758d806b5f0@mail.gmail.com>

Hi Shane, sorry for taking so long to answer.

On Mon, Apr 7, 2008 at 4:19 PM, Shane Graber <sgraber at gmail.com> wrote:
> I'm getting ready to migrate three Plone 2.0.5 sites to Plone
>  2.5/Debian.  My questions are the following:
>
>  1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
>  well as Plone 2.5?

We have tested as far as Plone 2.1, but not Plone 2.0.5.

>  2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
>  content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
>  site and into a Plone 2.5 site and keep all of the metadata intact?
>  (i.e. Title, Description, id, workflow)

Yes and No. Only the file content will be transferred on a default
setup. But if you configure the Marshaller Registry to use ATXML on
both sites, then it could work. We have used ATXML to import content
in the past, though not using Enfold Desktop. Let us know if you get
it working so we can spread the word.

>  I'm contemplating this route as it would allow me to start w/ a fresh
>  Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
>  Thanks!

Thank you!

-- 
Sidnei da Silva
Enfold Systems http://enfoldsystems.com
Fax +1 832 201 8856 Office +1 713 942 2377 Ext 214


From cbc at unc.edu  Mon Apr 28 14:21:45 2008
From: cbc at unc.edu (Chris Calloway)
Date: Mon, 28 Apr 2008 15:21:45 -0400
Subject: [Community-desktop] Error artifacts left after uninstall of Enfold
	Desktop
Message-ID: <481623C9.8050606@unc.edu>

I'm trying to migrate a Plone site. To that end, I'm uninstalling third 
party products. This is the same site I've been trying to migrate for 
months and have talked to you about before (I thank you for that help). 
I work on trying the migration for a few days, then have to go work on 
other stuff for awhile and come back to the migration attempts later. I 
run into some problems with ShellExServer in these attempts every time. 
I get a little father each time. This time I'm almost there, I think. I 
hope.

This is a Plone 2.5.2-1 site with desktop-server-3.0.0-6461-py24, python 
2.4.4., and Zope 2.9.7.

I have uninstalled all Enfold Desktop bundled products with Plone 
Add/Remove Products and have eliminated them from the Products directory 
as well. So now my Products directory looks like Plone out of the box:

Archetypes
ATContentTypes
ATReferenceBrowserWidget
CacheFu
CMFActionIcons
CMFCalendar
CMFCore
CMFDefault
CMFDynamicViewFTI
CMFFormController
CMFPlacefulWorkflow
CMFPlone
CMFQuickInstallerTool
CMFSetup
CMFTopic
CMFUid
CONTENTS.txt
DCWorkflow
ExtendedPathIndex
ExternalEditor
GenericSetup
GroupUserFolder
kupu
Marshall
MimetypesRegistry
PasswordResetTool
PlacelessTranslationService
PloneErrorReporting
PloneLanguageTool
PlonePAS
PloneTestCase
PloneTranslations
PluggableAuthService
PasswordResetToolPluginRegistry
PortalTransforms
README.txt
ResourceRegistries
SecureMailHost
statusmessages
validation

The first time I access the site after completely eliminating Enfold 
Desktop, I get these two event.log entries:

------
2008-04-28T14:16:35 WARNING ZODB Could not import class 
'EnvironmentSuppressAccessRule' from module 'Products.ShellExServer.utils'
------
2008-04-28T14:16:35 WARNING ZODB Could not import class 'Normalizer' 
from module 'Products.ShellExServer.normalize'
------

At the same time I get *three* of these:

------
2008-04-28T14:50:32 ERROR root Exception while rendering an error message
Traceback (most recent call last):
   File "/usr/local/Zope-2.9.7/lib/python/OFS/SimpleItem.py", line 223, 
in raise_standardErrorMessage
     v = s(**kwargs)
   File 
"/usr/local/Zope-2.9.7/lib/python/Shared/DC/Scripts/Bindings.py", line 
311, in __call__
     return self._bindAndExec(args, kw, None)
   File 
"/usr/local/Zope-2.9.7/lib/python/Shared/DC/Scripts/Bindings.py", line 
348, in _bindAndExec
     return self._exec(bound_data, args, kw)
   File 
"/usr/local/Zope-2.9.7/lib/python/Products/PythonScripts/PythonScript.py", 
line 326, in _exec
     result = f(*args, **kw)
   File "Script (Python)", line 1, in standard_error_message
   File "/usr/local/Zope-2.9.7/lib/python/AccessControl/ZopeGuards.py", 
line 286, in guarded_import
     raise ImportError, 'import of "%s" is unauthorized' % mname
ImportError: import of "Products.ShellExServer.utils" is unauthorized
------

And then on *every* page access I get *several* of the following:

------
2008-04-28T14:16:37 ERROR MultiHook '__before_publishing_traverse__' 
call <EnvironmentSuppressAccessRule at broken> failed.
Traceback (most recent call last):
   File "/usr/local/Zope-2.9.7/lib/python/ZPublisher/BeforeTraverse.py", 
line 104, in __call__
     cob(container, request)
TypeError: 'EnvironmentSuppressAccessRule' object is not callable
------

So, I'm wondering, why am I still getting references to ShellExServer 
modules and classes after uninstalling and removing ShellExServer? Was 
something monkey patched when I installed ShellExServer? How am I 
getting out of this forest?

-- 
Sincerely,

Chris Calloway
http://www.secoora.org
office: 332 Chapman Hall   phone: (919) 599-3530
mail: Campus Box #3300, UNC-CH, Chapel Hill, NC 27599





From sidnei at enfoldsystems.com  Mon Apr 28 15:09:21 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Mon, 28 Apr 2008 17:09:21 -0300
Subject: [Community-desktop] Error artifacts left after uninstall of
	Enfold Desktop
In-Reply-To: <481623C9.8050606@unc.edu>
References: <481623C9.8050606@unc.edu>
Message-ID: <a7a2b76b0804281309s8c3e445m1b65381a780b9637@mail.gmail.com>

Doesn't look like you did uninstall ShellExServer before removing it
from the products directory. *OR* it could be a uninstall bug that we
fixed after r6461.

On Mon, Apr 28, 2008 at 4:21 PM, Chris Calloway <cbc at unc.edu> wrote:
> I'm trying to migrate a Plone site. To that end, I'm uninstalling third
>  party products. This is the same site I've been trying to migrate for
>  months and have talked to you about before (I thank you for that help).
>  I work on trying the migration for a few days, then have to go work on
>  other stuff for awhile and come back to the migration attempts later. I
>  run into some problems with ShellExServer in these attempts every time.
>  I get a little father each time. This time I'm almost there, I think. I
>  hope.
>
>  This is a Plone 2.5.2-1 site with desktop-server-3.0.0-6461-py24, python
>  2.4.4., and Zope 2.9.7.
>
>  I have uninstalled all Enfold Desktop bundled products with Plone
>  Add/Remove Products and have eliminated them from the Products directory
>  as well. So now my Products directory looks like Plone out of the box:
>
>  Archetypes
>  ATContentTypes
>  ATReferenceBrowserWidget
>  CacheFu
>  CMFActionIcons
>  CMFCalendar
>  CMFCore
>  CMFDefault
>  CMFDynamicViewFTI
>  CMFFormController
>  CMFPlacefulWorkflow
>  CMFPlone
>  CMFQuickInstallerTool
>  CMFSetup
>  CMFTopic
>  CMFUid
>  CONTENTS.txt
>  DCWorkflow
>  ExtendedPathIndex
>  ExternalEditor
>  GenericSetup
>  GroupUserFolder
>  kupu
>  Marshall
>  MimetypesRegistry
>  PasswordResetTool
>  PlacelessTranslationService
>  PloneErrorReporting
>  PloneLanguageTool
>  PlonePAS
>  PloneTestCase
>  PloneTranslations
>  PluggableAuthService
>  PasswordResetToolPluginRegistry
>  PortalTransforms
>  README.txt
>  ResourceRegistries
>  SecureMailHost
>  statusmessages
>  validation
>
>  The first time I access the site after completely eliminating Enfold
>  Desktop, I get these two event.log entries:
>
>  ------
>  2008-04-28T14:16:35 WARNING ZODB Could not import class
>  'EnvironmentSuppressAccessRule' from module 'Products.ShellExServer.utils'
>  ------
>  2008-04-28T14:16:35 WARNING ZODB Could not import class 'Normalizer'
>  from module 'Products.ShellExServer.normalize'
>  ------
>
>  At the same time I get *three* of these:
>
>  ------
>  2008-04-28T14:50:32 ERROR root Exception while rendering an error message
>  Traceback (most recent call last):
>    File "/usr/local/Zope-2.9.7/lib/python/OFS/SimpleItem.py", line 223,
>  in raise_standardErrorMessage
>      v = s(**kwargs)
>    File
>  "/usr/local/Zope-2.9.7/lib/python/Shared/DC/Scripts/Bindings.py", line
>  311, in __call__
>      return self._bindAndExec(args, kw, None)
>    File
>  "/usr/local/Zope-2.9.7/lib/python/Shared/DC/Scripts/Bindings.py", line
>  348, in _bindAndExec
>      return self._exec(bound_data, args, kw)
>    File
>  "/usr/local/Zope-2.9.7/lib/python/Products/PythonScripts/PythonScript.py",
>  line 326, in _exec
>      result = f(*args, **kw)
>    File "Script (Python)", line 1, in standard_error_message
>    File "/usr/local/Zope-2.9.7/lib/python/AccessControl/ZopeGuards.py",
>  line 286, in guarded_import
>      raise ImportError, 'import of "%s" is unauthorized' % mname
>  ImportError: import of "Products.ShellExServer.utils" is unauthorized
>  ------
>
>  And then on *every* page access I get *several* of the following:
>
>  ------
>  2008-04-28T14:16:37 ERROR MultiHook '__before_publishing_traverse__'
>  call <EnvironmentSuppressAccessRule at broken> failed.
>  Traceback (most recent call last):
>    File "/usr/local/Zope-2.9.7/lib/python/ZPublisher/BeforeTraverse.py",
>  line 104, in __call__
>      cob(container, request)
>  TypeError: 'EnvironmentSuppressAccessRule' object is not callable
>  ------
>
>  So, I'm wondering, why am I still getting references to ShellExServer
>  modules and classes after uninstalling and removing ShellExServer? Was
>  something monkey patched when I installed ShellExServer? How am I
>  getting out of this forest?
>
>  --
>  Sincerely,
>
>  Chris Calloway
>  http://www.secoora.org
>  office: 332 Chapman Hall   phone: (919) 599-3530
>  mail: Campus Box #3300, UNC-CH, Chapel Hill, NC 27599
>
>
>
>  _______________________________________________
>  Community-desktop mailing list
>  Community-desktop at lists.enfoldsystems.com
>  http://lists.enfoldsystems.com/mailman/listinfo/community-desktop
>



-- 
Sidnei da Silva
Enfold Systems                http://enfoldsystems.com
Fax +1 832 201 8856     Office +1 713 942 2377 Ext 214


From cbc at unc.edu  Mon Apr 28 16:38:42 2008
From: cbc at unc.edu (Chris Calloway)
Date: Mon, 28 Apr 2008 17:38:42 -0400
Subject: [Community-desktop] Error artifacts left after uninstall of
 Enfold Desktop
In-Reply-To: <a7a2b76b0804281309s8c3e445m1b65381a780b9637@mail.gmail.com>
References: <481623C9.8050606@unc.edu>
	<a7a2b76b0804281309s8c3e445m1b65381a780b9637@mail.gmail.com>
Message-ID: <481643E2.9050205@unc.edu>

On 4/28/2008 4:09 PM, Sidnei da Silva wrote:
> Doesn't look like you did uninstall ShellExServer before removing it
> from the products directory. *OR* it could be a uninstall bug that we
> fixed after r6461.

Please accept my word that I did indeed uninstall Desktop Server 
products in Plone, stopped Zope, and removed the directories from 
Products in that order as described in my more recent email to this 
list. I didn't start installing or uninstalling Plone products yesterday 
and full well know the consequences of removing a product's directory 
before uninstalling a product.

Is there an uninstall bug in ED 3.0.0 fixed after r6461? I just went to 
enfoldsystems.com to download whatever the latest ED 3.0.0 would be and 
it gave me r6461 again.

-- 
Sincerely,

Chris Calloway
http://www.secoora.org
office: 332 Chapman Hall   phone: (919) 599-3530
mail: Campus Box #3300, UNC-CH, Chapel Hill, NC 27599





From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sidnei at enfoldsystems.com  Wed Apr  9 10:01:18 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Wed, 9 Apr 2008 12:01:18 -0300
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
In-Reply-To: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
References: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
Message-ID: <a7a2b76b0804090801o596bc43cs810e8758d806b5f0@mail.gmail.com>

Hi Shane, sorry for taking so long to answer.

On Mon, Apr 7, 2008 at 4:19 PM, Shane Graber <sgraber at gmail.com> wrote:
> I'm getting ready to migrate three Plone 2.0.5 sites to Plone
>  2.5/Debian.  My questions are the following:
>
>  1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
>  well as Plone 2.5?

We have tested as far as Plone 2.1, but not Plone 2.0.5.

>  2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
>  content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
>  site and into a Plone 2.5 site and keep all of the metadata intact?
>  (i.e. Title, Description, id, workflow)

Yes and No. Only the file content will be transferred on a default
setup. But if you configure the Marshaller Registry to use ATXML on
both sites, then it could work. We have used ATXML to import content
in the past, though not using Enfold Desktop. Let us know if you get
it working so we can spread the word.

>  I'm contemplating this route as it would allow me to start w/ a fresh
>  Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
>  Thanks!

Thank you!

-- 
Sidnei da Silva
Enfold Systems http://enfoldsystems.com
Fax +1 832 201 8856 Office +1 713 942 2377 Ext 214


From cbc at unc.edu  Mon Apr 28 14:21:45 2008
From: cbc at unc.edu (Chris Calloway)
Date: Mon, 28 Apr 2008 15:21:45 -0400
Subject: [Community-desktop] Error artifacts left after uninstall of Enfold
	Desktop
Message-ID: <481623C9.8050606@unc.edu>

I'm trying to migrate a Plone site. To that end, I'm uninstalling third 
party products. This is the same site I've been trying to migrate for 
months and have talked to you about before (I thank you for that help). 
I work on trying the migration for a few days, then have to go work on 
other stuff for awhile and come back to the migration attempts later. I 
run into some problems with ShellExServer in these attempts every time. 
I get a little father each time. This time I'm almost there, I think. I 
hope.

This is a Plone 2.5.2-1 site with desktop-server-3.0.0-6461-py24, python 
2.4.4., and Zope 2.9.7.

I have uninstalled all Enfold Desktop bundled products with Plone 
Add/Remove Products and have eliminated them from the Products directory 
as well. So now my Products directory looks like Plone out of the box:

Archetypes
ATContentTypes
ATReferenceBrowserWidget
CacheFu
CMFActionIcons
CMFCalendar
CMFCore
CMFDefault
CMFDynamicViewFTI
CMFFormController
CMFPlacefulWorkflow
CMFPlone
CMFQuickInstallerTool
CMFSetup
CMFTopic
CMFUid
CONTENTS.txt
DCWorkflow
ExtendedPathIndex
ExternalEditor
GenericSetup
GroupUserFolder
kupu
Marshall
MimetypesRegistry
PasswordResetTool
PlacelessTranslationService
PloneErrorReporting
PloneLanguageTool
PlonePAS
PloneTestCase
PloneTranslations
PluggableAuthService
PasswordResetToolPluginRegistry
PortalTransforms
README.txt
ResourceRegistries
SecureMailHost
statusmessages
validation

The first time I access the site after completely eliminating Enfold 
Desktop, I get these two event.log entries:

------
2008-04-28T14:16:35 WARNING ZODB Could not import class 
'EnvironmentSuppressAccessRule' from module 'Products.ShellExServer.utils'
------
2008-04-28T14:16:35 WARNING ZODB Could not import class 'Normalizer' 
from module 'Products.ShellExServer.normalize'
------

At the same time I get *three* of these:

------
2008-04-28T14:50:32 ERROR root Exception while rendering an error message
Traceback (most recent call last):
   File "/usr/local/Zope-2.9.7/lib/python/OFS/SimpleItem.py", line 223, 
in raise_standardErrorMessage
     v = s(**kwargs)
   File 
"/usr/local/Zope-2.9.7/lib/python/Shared/DC/Scripts/Bindings.py", line 
311, in __call__
     return self._bindAndExec(args, kw, None)
   File 
"/usr/local/Zope-2.9.7/lib/python/Shared/DC/Scripts/Bindings.py", line 
348, in _bindAndExec
     return self._exec(bound_data, args, kw)
   File 
"/usr/local/Zope-2.9.7/lib/python/Products/PythonScripts/PythonScript.py", 
line 326, in _exec
     result = f(*args, **kw)
   File "Script (Python)", line 1, in standard_error_message
   File "/usr/local/Zope-2.9.7/lib/python/AccessControl/ZopeGuards.py", 
line 286, in guarded_import
     raise ImportError, 'import of "%s" is unauthorized' % mname
ImportError: import of "Products.ShellExServer.utils" is unauthorized
------

And then on *every* page access I get *several* of the following:

------
2008-04-28T14:16:37 ERROR MultiHook '__before_publishing_traverse__' 
call <EnvironmentSuppressAccessRule at broken> failed.
Traceback (most recent call last):
   File "/usr/local/Zope-2.9.7/lib/python/ZPublisher/BeforeTraverse.py", 
line 104, in __call__
     cob(container, request)
TypeError: 'EnvironmentSuppressAccessRule' object is not callable
------

So, I'm wondering, why am I still getting references to ShellExServer 
modules and classes after uninstalling and removing ShellExServer? Was 
something monkey patched when I installed ShellExServer? How am I 
getting out of this forest?

-- 
Sincerely,

Chris Calloway
http://www.secoora.org
office: 332 Chapman Hall   phone: (919) 599-3530
mail: Campus Box #3300, UNC-CH, Chapel Hill, NC 27599





From sidnei at enfoldsystems.com  Mon Apr 28 15:09:21 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Mon, 28 Apr 2008 17:09:21 -0300
Subject: [Community-desktop] Error artifacts left after uninstall of
	Enfold Desktop
In-Reply-To: <481623C9.8050606@unc.edu>
References: <481623C9.8050606@unc.edu>
Message-ID: <a7a2b76b0804281309s8c3e445m1b65381a780b9637@mail.gmail.com>

Doesn't look like you did uninstall ShellExServer before removing it
from the products directory. *OR* it could be a uninstall bug that we
fixed after r6461.

On Mon, Apr 28, 2008 at 4:21 PM, Chris Calloway <cbc at unc.edu> wrote:
> I'm trying to migrate a Plone site. To that end, I'm uninstalling third
>  party products. This is the same site I've been trying to migrate for
>  months and have talked to you about before (I thank you for that help).
>  I work on trying the migration for a few days, then have to go work on
>  other stuff for awhile and come back to the migration attempts later. I
>  run into some problems with ShellExServer in these attempts every time.
>  I get a little father each time. This time I'm almost there, I think. I
>  hope.
>
>  This is a Plone 2.5.2-1 site with desktop-server-3.0.0-6461-py24, python
>  2.4.4., and Zope 2.9.7.
>
>  I have uninstalled all Enfold Desktop bundled products with Plone
>  Add/Remove Products and have eliminated them from the Products directory
>  as well. So now my Products directory looks like Plone out of the box:
>
>  Archetypes
>  ATContentTypes
>  ATReferenceBrowserWidget
>  CacheFu
>  CMFActionIcons
>  CMFCalendar
>  CMFCore
>  CMFDefault
>  CMFDynamicViewFTI
>  CMFFormController
>  CMFPlacefulWorkflow
>  CMFPlone
>  CMFQuickInstallerTool
>  CMFSetup
>  CMFTopic
>  CMFUid
>  CONTENTS.txt
>  DCWorkflow
>  ExtendedPathIndex
>  ExternalEditor
>  GenericSetup
>  GroupUserFolder
>  kupu
>  Marshall
>  MimetypesRegistry
>  PasswordResetTool
>  PlacelessTranslationService
>  PloneErrorReporting
>  PloneLanguageTool
>  PlonePAS
>  PloneTestCase
>  PloneTranslations
>  PluggableAuthService
>  PasswordResetToolPluginRegistry
>  PortalTransforms
>  README.txt
>  ResourceRegistries
>  SecureMailHost
>  statusmessages
>  validation
>
>  The first time I access the site after completely eliminating Enfold
>  Desktop, I get these two event.log entries:
>
>  ------
>  2008-04-28T14:16:35 WARNING ZODB Could not import class
>  'EnvironmentSuppressAccessRule' from module 'Products.ShellExServer.utils'
>  ------
>  2008-04-28T14:16:35 WARNING ZODB Could not import class 'Normalizer'
>  from module 'Products.ShellExServer.normalize'
>  ------
>
>  At the same time I get *three* of these:
>
>  ------
>  2008-04-28T14:50:32 ERROR root Exception while rendering an error message
>  Traceback (most recent call last):
>    File "/usr/local/Zope-2.9.7/lib/python/OFS/SimpleItem.py", line 223,
>  in raise_standardErrorMessage
>      v = s(**kwargs)
>    File
>  "/usr/local/Zope-2.9.7/lib/python/Shared/DC/Scripts/Bindings.py", line
>  311, in __call__
>      return self._bindAndExec(args, kw, None)
>    File
>  "/usr/local/Zope-2.9.7/lib/python/Shared/DC/Scripts/Bindings.py", line
>  348, in _bindAndExec
>      return self._exec(bound_data, args, kw)
>    File
>  "/usr/local/Zope-2.9.7/lib/python/Products/PythonScripts/PythonScript.py",
>  line 326, in _exec
>      result = f(*args, **kw)
>    File "Script (Python)", line 1, in standard_error_message
>    File "/usr/local/Zope-2.9.7/lib/python/AccessControl/ZopeGuards.py",
>  line 286, in guarded_import
>      raise ImportError, 'import of "%s" is unauthorized' % mname
>  ImportError: import of "Products.ShellExServer.utils" is unauthorized
>  ------
>
>  And then on *every* page access I get *several* of the following:
>
>  ------
>  2008-04-28T14:16:37 ERROR MultiHook '__before_publishing_traverse__'
>  call <EnvironmentSuppressAccessRule at broken> failed.
>  Traceback (most recent call last):
>    File "/usr/local/Zope-2.9.7/lib/python/ZPublisher/BeforeTraverse.py",
>  line 104, in __call__
>      cob(container, request)
>  TypeError: 'EnvironmentSuppressAccessRule' object is not callable
>  ------
>
>  So, I'm wondering, why am I still getting references to ShellExServer
>  modules and classes after uninstalling and removing ShellExServer? Was
>  something monkey patched when I installed ShellExServer? How am I
>  getting out of this forest?
>
>  --
>  Sincerely,
>
>  Chris Calloway
>  http://www.secoora.org
>  office: 332 Chapman Hall   phone: (919) 599-3530
>  mail: Campus Box #3300, UNC-CH, Chapel Hill, NC 27599
>
>
>
>  _______________________________________________
>  Community-desktop mailing list
>  Community-desktop at lists.enfoldsystems.com
>  http://lists.enfoldsystems.com/mailman/listinfo/community-desktop
>



-- 
Sidnei da Silva
Enfold Systems                http://enfoldsystems.com
Fax +1 832 201 8856     Office +1 713 942 2377 Ext 214


From cbc at unc.edu  Mon Apr 28 16:38:42 2008
From: cbc at unc.edu (Chris Calloway)
Date: Mon, 28 Apr 2008 17:38:42 -0400
Subject: [Community-desktop] Error artifacts left after uninstall of
 Enfold Desktop
In-Reply-To: <a7a2b76b0804281309s8c3e445m1b65381a780b9637@mail.gmail.com>
References: <481623C9.8050606@unc.edu>
	<a7a2b76b0804281309s8c3e445m1b65381a780b9637@mail.gmail.com>
Message-ID: <481643E2.9050205@unc.edu>

On 4/28/2008 4:09 PM, Sidnei da Silva wrote:
> Doesn't look like you did uninstall ShellExServer before removing it
> from the products directory. *OR* it could be a uninstall bug that we
> fixed after r6461.

Please accept my word that I did indeed uninstall Desktop Server 
products in Plone, stopped Zope, and removed the directories from 
Products in that order as described in my more recent email to this 
list. I didn't start installing or uninstalling Plone products yesterday 
and full well know the consequences of removing a product's directory 
before uninstalling a product.

Is there an uninstall bug in ED 3.0.0 fixed after r6461? I just went to 
enfoldsystems.com to download whatever the latest ED 3.0.0 would be and 
it gave me r6461 again.

-- 
Sincerely,

Chris Calloway
http://www.secoora.org
office: 332 Chapman Hall   phone: (919) 599-3530
mail: Campus Box #3300, UNC-CH, Chapel Hill, NC 27599





From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sidnei at enfoldsystems.com  Wed Apr  9 10:01:18 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Wed, 9 Apr 2008 12:01:18 -0300
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
In-Reply-To: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
References: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
Message-ID: <a7a2b76b0804090801o596bc43cs810e8758d806b5f0@mail.gmail.com>

Hi Shane, sorry for taking so long to answer.

On Mon, Apr 7, 2008 at 4:19 PM, Shane Graber <sgraber at gmail.com> wrote:
> I'm getting ready to migrate three Plone 2.0.5 sites to Plone
>  2.5/Debian.  My questions are the following:
>
>  1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
>  well as Plone 2.5?

We have tested as far as Plone 2.1, but not Plone 2.0.5.

>  2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
>  content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
>  site and into a Plone 2.5 site and keep all of the metadata intact?
>  (i.e. Title, Description, id, workflow)

Yes and No. Only the file content will be transferred on a default
setup. But if you configure the Marshaller Registry to use ATXML on
both sites, then it could work. We have used ATXML to import content
in the past, though not using Enfold Desktop. Let us know if you get
it working so we can spread the word.

>  I'm contemplating this route as it would allow me to start w/ a fresh
>  Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
>  Thanks!

Thank you!

-- 
Sidnei da Silva
Enfold Systems http://enfoldsystems.com
Fax +1 832 201 8856 Office +1 713 942 2377 Ext 214


From cbc at unc.edu  Mon Apr 28 14:21:45 2008
From: cbc at unc.edu (Chris Calloway)
Date: Mon, 28 Apr 2008 15:21:45 -0400
Subject: [Community-desktop] Error artifacts left after uninstall of Enfold
	Desktop
Message-ID: <481623C9.8050606@unc.edu>

I'm trying to migrate a Plone site. To that end, I'm uninstalling third 
party products. This is the same site I've been trying to migrate for 
months and have talked to you about before (I thank you for that help). 
I work on trying the migration for a few days, then have to go work on 
other stuff for awhile and come back to the migration attempts later. I 
run into some problems with ShellExServer in these attempts every time. 
I get a little father each time. This time I'm almost there, I think. I 
hope.

This is a Plone 2.5.2-1 site with desktop-server-3.0.0-6461-py24, python 
2.4.4., and Zope 2.9.7.

I have uninstalled all Enfold Desktop bundled products with Plone 
Add/Remove Products and have eliminated them from the Products directory 
as well. So now my Products directory looks like Plone out of the box:

Archetypes
ATContentTypes
ATReferenceBrowserWidget
CacheFu
CMFActionIcons
CMFCalendar
CMFCore
CMFDefault
CMFDynamicViewFTI
CMFFormController
CMFPlacefulWorkflow
CMFPlone
CMFQuickInstallerTool
CMFSetup
CMFTopic
CMFUid
CONTENTS.txt
DCWorkflow
ExtendedPathIndex
ExternalEditor
GenericSetup
GroupUserFolder
kupu
Marshall
MimetypesRegistry
PasswordResetTool
PlacelessTranslationService
PloneErrorReporting
PloneLanguageTool
PlonePAS
PloneTestCase
PloneTranslations
PluggableAuthService
PasswordResetToolPluginRegistry
PortalTransforms
README.txt
ResourceRegistries
SecureMailHost
statusmessages
validation

The first time I access the site after completely eliminating Enfold 
Desktop, I get these two event.log entries:

------
2008-04-28T14:16:35 WARNING ZODB Could not import class 
'EnvironmentSuppressAccessRule' from module 'Products.ShellExServer.utils'
------
2008-04-28T14:16:35 WARNING ZODB Could not import class 'Normalizer' 
from module 'Products.ShellExServer.normalize'
------

At the same time I get *three* of these:

------
2008-04-28T14:50:32 ERROR root Exception while rendering an error message
Traceback (most recent call last):
   File "/usr/local/Zope-2.9.7/lib/python/OFS/SimpleItem.py", line 223, 
in raise_standardErrorMessage
     v = s(**kwargs)
   File 
"/usr/local/Zope-2.9.7/lib/python/Shared/DC/Scripts/Bindings.py", line 
311, in __call__
     return self._bindAndExec(args, kw, None)
   File 
"/usr/local/Zope-2.9.7/lib/python/Shared/DC/Scripts/Bindings.py", line 
348, in _bindAndExec
     return self._exec(bound_data, args, kw)
   File 
"/usr/local/Zope-2.9.7/lib/python/Products/PythonScripts/PythonScript.py", 
line 326, in _exec
     result = f(*args, **kw)
   File "Script (Python)", line 1, in standard_error_message
   File "/usr/local/Zope-2.9.7/lib/python/AccessControl/ZopeGuards.py", 
line 286, in guarded_import
     raise ImportError, 'import of "%s" is unauthorized' % mname
ImportError: import of "Products.ShellExServer.utils" is unauthorized
------

And then on *every* page access I get *several* of the following:

------
2008-04-28T14:16:37 ERROR MultiHook '__before_publishing_traverse__' 
call <EnvironmentSuppressAccessRule at broken> failed.
Traceback (most recent call last):
   File "/usr/local/Zope-2.9.7/lib/python/ZPublisher/BeforeTraverse.py", 
line 104, in __call__
     cob(container, request)
TypeError: 'EnvironmentSuppressAccessRule' object is not callable
------

So, I'm wondering, why am I still getting references to ShellExServer 
modules and classes after uninstalling and removing ShellExServer? Was 
something monkey patched when I installed ShellExServer? How am I 
getting out of this forest?

-- 
Sincerely,

Chris Calloway
http://www.secoora.org
office: 332 Chapman Hall   phone: (919) 599-3530
mail: Campus Box #3300, UNC-CH, Chapel Hill, NC 27599





From sidnei at enfoldsystems.com  Mon Apr 28 15:09:21 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Mon, 28 Apr 2008 17:09:21 -0300
Subject: [Community-desktop] Error artifacts left after uninstall of
	Enfold Desktop
In-Reply-To: <481623C9.8050606@unc.edu>
References: <481623C9.8050606@unc.edu>
Message-ID: <a7a2b76b0804281309s8c3e445m1b65381a780b9637@mail.gmail.com>

Doesn't look like you did uninstall ShellExServer before removing it
from the products directory. *OR* it could be a uninstall bug that we
fixed after r6461.

On Mon, Apr 28, 2008 at 4:21 PM, Chris Calloway <cbc at unc.edu> wrote:
> I'm trying to migrate a Plone site. To that end, I'm uninstalling third
>  party products. This is the same site I've been trying to migrate for
>  months and have talked to you about before (I thank you for that help).
>  I work on trying the migration for a few days, then have to go work on
>  other stuff for awhile and come back to the migration attempts later. I
>  run into some problems with ShellExServer in these attempts every time.
>  I get a little father each time. This time I'm almost there, I think. I
>  hope.
>
>  This is a Plone 2.5.2-1 site with desktop-server-3.0.0-6461-py24, python
>  2.4.4., and Zope 2.9.7.
>
>  I have uninstalled all Enfold Desktop bundled products with Plone
>  Add/Remove Products and have eliminated them from the Products directory
>  as well. So now my Products directory looks like Plone out of the box:
>
>  Archetypes
>  ATContentTypes
>  ATReferenceBrowserWidget
>  CacheFu
>  CMFActionIcons
>  CMFCalendar
>  CMFCore
>  CMFDefault
>  CMFDynamicViewFTI
>  CMFFormController
>  CMFPlacefulWorkflow
>  CMFPlone
>  CMFQuickInstallerTool
>  CMFSetup
>  CMFTopic
>  CMFUid
>  CONTENTS.txt
>  DCWorkflow
>  ExtendedPathIndex
>  ExternalEditor
>  GenericSetup
>  GroupUserFolder
>  kupu
>  Marshall
>  MimetypesRegistry
>  PasswordResetTool
>  PlacelessTranslationService
>  PloneErrorReporting
>  PloneLanguageTool
>  PlonePAS
>  PloneTestCase
>  PloneTranslations
>  PluggableAuthService
>  PasswordResetToolPluginRegistry
>  PortalTransforms
>  README.txt
>  ResourceRegistries
>  SecureMailHost
>  statusmessages
>  validation
>
>  The first time I access the site after completely eliminating Enfold
>  Desktop, I get these two event.log entries:
>
>  ------
>  2008-04-28T14:16:35 WARNING ZODB Could not import class
>  'EnvironmentSuppressAccessRule' from module 'Products.ShellExServer.utils'
>  ------
>  2008-04-28T14:16:35 WARNING ZODB Could not import class 'Normalizer'
>  from module 'Products.ShellExServer.normalize'
>  ------
>
>  At the same time I get *three* of these:
>
>  ------
>  2008-04-28T14:50:32 ERROR root Exception while rendering an error message
>  Traceback (most recent call last):
>    File "/usr/local/Zope-2.9.7/lib/python/OFS/SimpleItem.py", line 223,
>  in raise_standardErrorMessage
>      v = s(**kwargs)
>    File
>  "/usr/local/Zope-2.9.7/lib/python/Shared/DC/Scripts/Bindings.py", line
>  311, in __call__
>      return self._bindAndExec(args, kw, None)
>    File
>  "/usr/local/Zope-2.9.7/lib/python/Shared/DC/Scripts/Bindings.py", line
>  348, in _bindAndExec
>      return self._exec(bound_data, args, kw)
>    File
>  "/usr/local/Zope-2.9.7/lib/python/Products/PythonScripts/PythonScript.py",
>  line 326, in _exec
>      result = f(*args, **kw)
>    File "Script (Python)", line 1, in standard_error_message
>    File "/usr/local/Zope-2.9.7/lib/python/AccessControl/ZopeGuards.py",
>  line 286, in guarded_import
>      raise ImportError, 'import of "%s" is unauthorized' % mname
>  ImportError: import of "Products.ShellExServer.utils" is unauthorized
>  ------
>
>  And then on *every* page access I get *several* of the following:
>
>  ------
>  2008-04-28T14:16:37 ERROR MultiHook '__before_publishing_traverse__'
>  call <EnvironmentSuppressAccessRule at broken> failed.
>  Traceback (most recent call last):
>    File "/usr/local/Zope-2.9.7/lib/python/ZPublisher/BeforeTraverse.py",
>  line 104, in __call__
>      cob(container, request)
>  TypeError: 'EnvironmentSuppressAccessRule' object is not callable
>  ------
>
>  So, I'm wondering, why am I still getting references to ShellExServer
>  modules and classes after uninstalling and removing ShellExServer? Was
>  something monkey patched when I installed ShellExServer? How am I
>  getting out of this forest?
>
>  --
>  Sincerely,
>
>  Chris Calloway
>  http://www.secoora.org
>  office: 332 Chapman Hall   phone: (919) 599-3530
>  mail: Campus Box #3300, UNC-CH, Chapel Hill, NC 27599
>
>
>
>  _______________________________________________
>  Community-desktop mailing list
>  Community-desktop at lists.enfoldsystems.com
>  http://lists.enfoldsystems.com/mailman/listinfo/community-desktop
>



-- 
Sidnei da Silva
Enfold Systems                http://enfoldsystems.com
Fax +1 832 201 8856     Office +1 713 942 2377 Ext 214


From cbc at unc.edu  Mon Apr 28 16:38:42 2008
From: cbc at unc.edu (Chris Calloway)
Date: Mon, 28 Apr 2008 17:38:42 -0400
Subject: [Community-desktop] Error artifacts left after uninstall of
 Enfold Desktop
In-Reply-To: <a7a2b76b0804281309s8c3e445m1b65381a780b9637@mail.gmail.com>
References: <481623C9.8050606@unc.edu>
	<a7a2b76b0804281309s8c3e445m1b65381a780b9637@mail.gmail.com>
Message-ID: <481643E2.9050205@unc.edu>

On 4/28/2008 4:09 PM, Sidnei da Silva wrote:
> Doesn't look like you did uninstall ShellExServer before removing it
> from the products directory. *OR* it could be a uninstall bug that we
> fixed after r6461.

Please accept my word that I did indeed uninstall Desktop Server 
products in Plone, stopped Zope, and removed the directories from 
Products in that order as described in my more recent email to this 
list. I didn't start installing or uninstalling Plone products yesterday 
and full well know the consequences of removing a product's directory 
before uninstalling a product.

Is there an uninstall bug in ED 3.0.0 fixed after r6461? I just went to 
enfoldsystems.com to download whatever the latest ED 3.0.0 would be and 
it gave me r6461 again.

-- 
Sincerely,

Chris Calloway
http://www.secoora.org
office: 332 Chapman Hall   phone: (919) 599-3530
mail: Campus Box #3300, UNC-CH, Chapel Hill, NC 27599





From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sidnei at enfoldsystems.com  Wed Apr  9 10:01:18 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Wed, 9 Apr 2008 12:01:18 -0300
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
In-Reply-To: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
References: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
Message-ID: <a7a2b76b0804090801o596bc43cs810e8758d806b5f0@mail.gmail.com>

Hi Shane, sorry for taking so long to answer.

On Mon, Apr 7, 2008 at 4:19 PM, Shane Graber <sgraber at gmail.com> wrote:
> I'm getting ready to migrate three Plone 2.0.5 sites to Plone
>  2.5/Debian.  My questions are the following:
>
>  1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
>  well as Plone 2.5?

We have tested as far as Plone 2.1, but not Plone 2.0.5.

>  2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
>  content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
>  site and into a Plone 2.5 site and keep all of the metadata intact?
>  (i.e. Title, Description, id, workflow)

Yes and No. Only the file content will be transferred on a default
setup. But if you configure the Marshaller Registry to use ATXML on
both sites, then it could work. We have used ATXML to import content
in the past, though not using Enfold Desktop. Let us know if you get
it working so we can spread the word.

>  I'm contemplating this route as it would allow me to start w/ a fresh
>  Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
>  Thanks!

Thank you!

-- 
Sidnei da Silva
Enfold Systems http://enfoldsystems.com
Fax +1 832 201 8856 Office +1 713 942 2377 Ext 214


From cbc at unc.edu  Mon Apr 28 14:21:45 2008
From: cbc at unc.edu (Chris Calloway)
Date: Mon, 28 Apr 2008 15:21:45 -0400
Subject: [Community-desktop] Error artifacts left after uninstall of Enfold
	Desktop
Message-ID: <481623C9.8050606@unc.edu>

I'm trying to migrate a Plone site. To that end, I'm uninstalling third 
party products. This is the same site I've been trying to migrate for 
months and have talked to you about before (I thank you for that help). 
I work on trying the migration for a few days, then have to go work on 
other stuff for awhile and come back to the migration attempts later. I 
run into some problems with ShellExServer in these attempts every time. 
I get a little father each time. This time I'm almost there, I think. I 
hope.

This is a Plone 2.5.2-1 site with desktop-server-3.0.0-6461-py24, python 
2.4.4., and Zope 2.9.7.

I have uninstalled all Enfold Desktop bundled products with Plone 
Add/Remove Products and have eliminated them from the Products directory 
as well. So now my Products directory looks like Plone out of the box:

Archetypes
ATContentTypes
ATReferenceBrowserWidget
CacheFu
CMFActionIcons
CMFCalendar
CMFCore
CMFDefault
CMFDynamicViewFTI
CMFFormController
CMFPlacefulWorkflow
CMFPlone
CMFQuickInstallerTool
CMFSetup
CMFTopic
CMFUid
CONTENTS.txt
DCWorkflow
ExtendedPathIndex
ExternalEditor
GenericSetup
GroupUserFolder
kupu
Marshall
MimetypesRegistry
PasswordResetTool
PlacelessTranslationService
PloneErrorReporting
PloneLanguageTool
PlonePAS
PloneTestCase
PloneTranslations
PluggableAuthService
PasswordResetToolPluginRegistry
PortalTransforms
README.txt
ResourceRegistries
SecureMailHost
statusmessages
validation

The first time I access the site after completely eliminating Enfold 
Desktop, I get these two event.log entries:

------
2008-04-28T14:16:35 WARNING ZODB Could not import class 
'EnvironmentSuppressAccessRule' from module 'Products.ShellExServer.utils'
------
2008-04-28T14:16:35 WARNING ZODB Could not import class 'Normalizer' 
from module 'Products.ShellExServer.normalize'
------

At the same time I get *three* of these:

------
2008-04-28T14:50:32 ERROR root Exception while rendering an error message
Traceback (most recent call last):
   File "/usr/local/Zope-2.9.7/lib/python/OFS/SimpleItem.py", line 223, 
in raise_standardErrorMessage
     v = s(**kwargs)
   File 
"/usr/local/Zope-2.9.7/lib/python/Shared/DC/Scripts/Bindings.py", line 
311, in __call__
     return self._bindAndExec(args, kw, None)
   File 
"/usr/local/Zope-2.9.7/lib/python/Shared/DC/Scripts/Bindings.py", line 
348, in _bindAndExec
     return self._exec(bound_data, args, kw)
   File 
"/usr/local/Zope-2.9.7/lib/python/Products/PythonScripts/PythonScript.py", 
line 326, in _exec
     result = f(*args, **kw)
   File "Script (Python)", line 1, in standard_error_message
   File "/usr/local/Zope-2.9.7/lib/python/AccessControl/ZopeGuards.py", 
line 286, in guarded_import
     raise ImportError, 'import of "%s" is unauthorized' % mname
ImportError: import of "Products.ShellExServer.utils" is unauthorized
------

And then on *every* page access I get *several* of the following:

------
2008-04-28T14:16:37 ERROR MultiHook '__before_publishing_traverse__' 
call <EnvironmentSuppressAccessRule at broken> failed.
Traceback (most recent call last):
   File "/usr/local/Zope-2.9.7/lib/python/ZPublisher/BeforeTraverse.py", 
line 104, in __call__
     cob(container, request)
TypeError: 'EnvironmentSuppressAccessRule' object is not callable
------

So, I'm wondering, why am I still getting references to ShellExServer 
modules and classes after uninstalling and removing ShellExServer? Was 
something monkey patched when I installed ShellExServer? How am I 
getting out of this forest?

-- 
Sincerely,

Chris Calloway
http://www.secoora.org
office: 332 Chapman Hall   phone: (919) 599-3530
mail: Campus Box #3300, UNC-CH, Chapel Hill, NC 27599





From sidnei at enfoldsystems.com  Mon Apr 28 15:09:21 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Mon, 28 Apr 2008 17:09:21 -0300
Subject: [Community-desktop] Error artifacts left after uninstall of
	Enfold Desktop
In-Reply-To: <481623C9.8050606@unc.edu>
References: <481623C9.8050606@unc.edu>
Message-ID: <a7a2b76b0804281309s8c3e445m1b65381a780b9637@mail.gmail.com>

Doesn't look like you did uninstall ShellExServer before removing it
from the products directory. *OR* it could be a uninstall bug that we
fixed after r6461.

On Mon, Apr 28, 2008 at 4:21 PM, Chris Calloway <cbc at unc.edu> wrote:
> I'm trying to migrate a Plone site. To that end, I'm uninstalling third
>  party products. This is the same site I've been trying to migrate for
>  months and have talked to you about before (I thank you for that help).
>  I work on trying the migration for a few days, then have to go work on
>  other stuff for awhile and come back to the migration attempts later. I
>  run into some problems with ShellExServer in these attempts every time.
>  I get a little father each time. This time I'm almost there, I think. I
>  hope.
>
>  This is a Plone 2.5.2-1 site with desktop-server-3.0.0-6461-py24, python
>  2.4.4., and Zope 2.9.7.
>
>  I have uninstalled all Enfold Desktop bundled products with Plone
>  Add/Remove Products and have eliminated them from the Products directory
>  as well. So now my Products directory looks like Plone out of the box:
>
>  Archetypes
>  ATContentTypes
>  ATReferenceBrowserWidget
>  CacheFu
>  CMFActionIcons
>  CMFCalendar
>  CMFCore
>  CMFDefault
>  CMFDynamicViewFTI
>  CMFFormController
>  CMFPlacefulWorkflow
>  CMFPlone
>  CMFQuickInstallerTool
>  CMFSetup
>  CMFTopic
>  CMFUid
>  CONTENTS.txt
>  DCWorkflow
>  ExtendedPathIndex
>  ExternalEditor
>  GenericSetup
>  GroupUserFolder
>  kupu
>  Marshall
>  MimetypesRegistry
>  PasswordResetTool
>  PlacelessTranslationService
>  PloneErrorReporting
>  PloneLanguageTool
>  PlonePAS
>  PloneTestCase
>  PloneTranslations
>  PluggableAuthService
>  PasswordResetToolPluginRegistry
>  PortalTransforms
>  README.txt
>  ResourceRegistries
>  SecureMailHost
>  statusmessages
>  validation
>
>  The first time I access the site after completely eliminating Enfold
>  Desktop, I get these two event.log entries:
>
>  ------
>  2008-04-28T14:16:35 WARNING ZODB Could not import class
>  'EnvironmentSuppressAccessRule' from module 'Products.ShellExServer.utils'
>  ------
>  2008-04-28T14:16:35 WARNING ZODB Could not import class 'Normalizer'
>  from module 'Products.ShellExServer.normalize'
>  ------
>
>  At the same time I get *three* of these:
>
>  ------
>  2008-04-28T14:50:32 ERROR root Exception while rendering an error message
>  Traceback (most recent call last):
>    File "/usr/local/Zope-2.9.7/lib/python/OFS/SimpleItem.py", line 223,
>  in raise_standardErrorMessage
>      v = s(**kwargs)
>    File
>  "/usr/local/Zope-2.9.7/lib/python/Shared/DC/Scripts/Bindings.py", line
>  311, in __call__
>      return self._bindAndExec(args, kw, None)
>    File
>  "/usr/local/Zope-2.9.7/lib/python/Shared/DC/Scripts/Bindings.py", line
>  348, in _bindAndExec
>      return self._exec(bound_data, args, kw)
>    File
>  "/usr/local/Zope-2.9.7/lib/python/Products/PythonScripts/PythonScript.py",
>  line 326, in _exec
>      result = f(*args, **kw)
>    File "Script (Python)", line 1, in standard_error_message
>    File "/usr/local/Zope-2.9.7/lib/python/AccessControl/ZopeGuards.py",
>  line 286, in guarded_import
>      raise ImportError, 'import of "%s" is unauthorized' % mname
>  ImportError: import of "Products.ShellExServer.utils" is unauthorized
>  ------
>
>  And then on *every* page access I get *several* of the following:
>
>  ------
>  2008-04-28T14:16:37 ERROR MultiHook '__before_publishing_traverse__'
>  call <EnvironmentSuppressAccessRule at broken> failed.
>  Traceback (most recent call last):
>    File "/usr/local/Zope-2.9.7/lib/python/ZPublisher/BeforeTraverse.py",
>  line 104, in __call__
>      cob(container, request)
>  TypeError: 'EnvironmentSuppressAccessRule' object is not callable
>  ------
>
>  So, I'm wondering, why am I still getting references to ShellExServer
>  modules and classes after uninstalling and removing ShellExServer? Was
>  something monkey patched when I installed ShellExServer? How am I
>  getting out of this forest?
>
>  --
>  Sincerely,
>
>  Chris Calloway
>  http://www.secoora.org
>  office: 332 Chapman Hall   phone: (919) 599-3530
>  mail: Campus Box #3300, UNC-CH, Chapel Hill, NC 27599
>
>
>
>  _______________________________________________
>  Community-desktop mailing list
>  Community-desktop at lists.enfoldsystems.com
>  http://lists.enfoldsystems.com/mailman/listinfo/community-desktop
>



-- 
Sidnei da Silva
Enfold Systems                http://enfoldsystems.com
Fax +1 832 201 8856     Office +1 713 942 2377 Ext 214


From cbc at unc.edu  Mon Apr 28 16:38:42 2008
From: cbc at unc.edu (Chris Calloway)
Date: Mon, 28 Apr 2008 17:38:42 -0400
Subject: [Community-desktop] Error artifacts left after uninstall of
 Enfold Desktop
In-Reply-To: <a7a2b76b0804281309s8c3e445m1b65381a780b9637@mail.gmail.com>
References: <481623C9.8050606@unc.edu>
	<a7a2b76b0804281309s8c3e445m1b65381a780b9637@mail.gmail.com>
Message-ID: <481643E2.9050205@unc.edu>

On 4/28/2008 4:09 PM, Sidnei da Silva wrote:
> Doesn't look like you did uninstall ShellExServer before removing it
> from the products directory. *OR* it could be a uninstall bug that we
> fixed after r6461.

Please accept my word that I did indeed uninstall Desktop Server 
products in Plone, stopped Zope, and removed the directories from 
Products in that order as described in my more recent email to this 
list. I didn't start installing or uninstalling Plone products yesterday 
and full well know the consequences of removing a product's directory 
before uninstalling a product.

Is there an uninstall bug in ED 3.0.0 fixed after r6461? I just went to 
enfoldsystems.com to download whatever the latest ED 3.0.0 would be and 
it gave me r6461 again.

-- 
Sincerely,

Chris Calloway
http://www.secoora.org
office: 332 Chapman Hall   phone: (919) 599-3530
mail: Campus Box #3300, UNC-CH, Chapel Hill, NC 27599





From sgraber at gmail.com  Mon Apr  7 14:19:37 2008
From: sgraber at gmail.com (Shane Graber)
Date: Mon, 7 Apr 2008 15:19:37 -0400
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
Message-ID: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>

I'm getting ready to migrate three Plone 2.0.5 sites to Plone
2.5/Debian.  My questions are the following:

1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
well as Plone 2.5?

2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
site and into a Plone 2.5 site and keep all of the metadata intact?
(i.e. Title, Description, id, workflow)

I'm contemplating this route as it would allow me to start w/ a fresh
Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
Thanks!

Shane Graber
Webmaster, Pomacanthus Publications, Inc.

-- 
Shane ? http://liquid.homelinux.org
---------
I'm so cool I can be used to prove Bose-Einstein Condensation!

From sidnei at enfoldsystems.com  Wed Apr  9 10:01:18 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Wed, 9 Apr 2008 12:01:18 -0300
Subject: [Community-desktop] Question about Enfold Desktop and Server
	Products
In-Reply-To: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
References: <f50ab91d0804071219o9e6e713ld3461ac4a864d25@mail.gmail.com>
Message-ID: <a7a2b76b0804090801o596bc43cs810e8758d806b5f0@mail.gmail.com>

Hi Shane, sorry for taking so long to answer.

On Mon, Apr 7, 2008 at 4:19 PM, Shane Graber <sgraber at gmail.com> wrote:
> I'm getting ready to migrate three Plone 2.0.5 sites to Plone
>  2.5/Debian.  My questions are the following:
>
>  1. Is Enfold server component version 4 compatible with Plone 2.0.5 as
>  well as Plone 2.5?

We have tested as far as Plone 2.1, but not Plone 2.0.5.

>  2. Using Enfold Server/Client 4, can one simply WebDAV out Plone
>  content (Document, CMFPhoto, Image, File, Link) from a Plone 2.0.5
>  site and into a Plone 2.5 site and keep all of the metadata intact?
>  (i.e. Title, Description, id, workflow)

Yes and No. Only the file content will be transferred on a default
setup. But if you configure the Marshaller Registry to use ATXML on
both sites, then it could work. We have used ATXML to import content
in the past, though not using Enfold Desktop. Let us know if you get
it working so we can spread the word.

>  I'm contemplating this route as it would allow me to start w/ a fresh
>  Plone 2.5 install and get rid of CMFPhoto.  Please let me know.
>  Thanks!

Thank you!

-- 
Sidnei da Silva
Enfold Systems http://enfoldsystems.com
Fax +1 832 201 8856 Office +1 713 942 2377 Ext 214


From cbc at unc.edu  Mon Apr 28 14:21:45 2008
From: cbc at unc.edu (Chris Calloway)
Date: Mon, 28 Apr 2008 15:21:45 -0400
Subject: [Community-desktop] Error artifacts left after uninstall of Enfold
	Desktop
Message-ID: <481623C9.8050606@unc.edu>

I'm trying to migrate a Plone site. To that end, I'm uninstalling third 
party products. This is the same site I've been trying to migrate for 
months and have talked to you about before (I thank you for that help). 
I work on trying the migration for a few days, then have to go work on 
other stuff for awhile and come back to the migration attempts later. I 
run into some problems with ShellExServer in these attempts every time. 
I get a little father each time. This time I'm almost there, I think. I 
hope.

This is a Plone 2.5.2-1 site with desktop-server-3.0.0-6461-py24, python 
2.4.4., and Zope 2.9.7.

I have uninstalled all Enfold Desktop bundled products with Plone 
Add/Remove Products and have eliminated them from the Products directory 
as well. So now my Products directory looks like Plone out of the box:

Archetypes
ATContentTypes
ATReferenceBrowserWidget
CacheFu
CMFActionIcons
CMFCalendar
CMFCore
CMFDefault
CMFDynamicViewFTI
CMFFormController
CMFPlacefulWorkflow
CMFPlone
CMFQuickInstallerTool
CMFSetup
CMFTopic
CMFUid
CONTENTS.txt
DCWorkflow
ExtendedPathIndex
ExternalEditor
GenericSetup
GroupUserFolder
kupu
Marshall
MimetypesRegistry
PasswordResetTool
PlacelessTranslationService
PloneErrorReporting
PloneLanguageTool
PlonePAS
PloneTestCase
PloneTranslations
PluggableAuthService
PasswordResetToolPluginRegistry
PortalTransforms
README.txt
ResourceRegistries
SecureMailHost
statusmessages
validation

The first time I access the site after completely eliminating Enfold 
Desktop, I get these two event.log entries:

------
2008-04-28T14:16:35 WARNING ZODB Could not import class 
'EnvironmentSuppressAccessRule' from module 'Products.ShellExServer.utils'
------
2008-04-28T14:16:35 WARNING ZODB Could not import class 'Normalizer' 
from module 'Products.ShellExServer.normalize'
------

At the same time I get *three* of these:

------
2008-04-28T14:50:32 ERROR root Exception while rendering an error message
Traceback (most recent call last):
   File "/usr/local/Zope-2.9.7/lib/python/OFS/SimpleItem.py", line 223, 
in raise_standardErrorMessage
     v = s(**kwargs)
   File 
"/usr/local/Zope-2.9.7/lib/python/Shared/DC/Scripts/Bindings.py", line 
311, in __call__
     return self._bindAndExec(args, kw, None)
   File 
"/usr/local/Zope-2.9.7/lib/python/Shared/DC/Scripts/Bindings.py", line 
348, in _bindAndExec
     return self._exec(bound_data, args, kw)
   File 
"/usr/local/Zope-2.9.7/lib/python/Products/PythonScripts/PythonScript.py", 
line 326, in _exec
     result = f(*args, **kw)
   File "Script (Python)", line 1, in standard_error_message
   File "/usr/local/Zope-2.9.7/lib/python/AccessControl/ZopeGuards.py", 
line 286, in guarded_import
     raise ImportError, 'import of "%s" is unauthorized' % mname
ImportError: import of "Products.ShellExServer.utils" is unauthorized
------

And then on *every* page access I get *several* of the following:

------
2008-04-28T14:16:37 ERROR MultiHook '__before_publishing_traverse__' 
call <EnvironmentSuppressAccessRule at broken> failed.
Traceback (most recent call last):
   File "/usr/local/Zope-2.9.7/lib/python/ZPublisher/BeforeTraverse.py", 
line 104, in __call__
     cob(container, request)
TypeError: 'EnvironmentSuppressAccessRule' object is not callable
------

So, I'm wondering, why am I still getting references to ShellExServer 
modules and classes after uninstalling and removing ShellExServer? Was 
something monkey patched when I installed ShellExServer? How am I 
getting out of this forest?

-- 
Sincerely,

Chris Calloway
http://www.secoora.org
office: 332 Chapman Hall   phone: (919) 599-3530
mail: Campus Box #3300, UNC-CH, Chapel Hill, NC 27599





From sidnei at enfoldsystems.com  Mon Apr 28 15:09:21 2008
From: sidnei at enfoldsystems.com (Sidnei da Silva)
Date: Mon, 28 Apr 2008 17:09:21 -0300
Subject: [Community-desktop] Error artifacts left after uninstall of
	Enfold Desktop
In-Reply-To: <481623C9.8050606@unc.edu>
References: <481623C9.8050606@unc.edu>
Message-ID: <a7a2b76b0804281309s8c3e445m1b65381a780b9637@mail.gmail.com>

Doesn't look like you did uninstall ShellExServer before removing it
from the products directory. *OR* it could be a uninstall bug that we
fixed after r6461.

On Mon, Apr 28, 2008 at 4:21 PM, Chris Calloway <cbc at unc.edu> wrote:
> I'm trying to migrate a Plone site. To that end, I'm uninstalling third
>  party products. This is the same site I've been trying to migrate for
>  months and have talked to you about before (I thank you for that help).
>  I work on trying the migration for a few days, then have to go work on
>  other stuff for awhile and come back to the migration attempts later. I
>  run into some problems with ShellExServer in these attempts every time.
>  I get a little father each time. This time I'm almost there, I think. I
>  hope.
>
>  This is a Plone 2.5.2-1 site with desktop-server-3.0.0-6461-py24, python
>  2.4.4., and Zope 2.9.7.
>
>  I have uninstalled all Enfold Desktop bundled products with Plone
>  Add/Remove Products and have eliminated them from the Products directory
>  as well. So now my Products directory looks like Plone out of the box:
>
>  Archetypes
>  ATContentTypes
>  ATReferenceBrowserWidget
>  CacheFu
>  CMFActionIcons
>  CMFCalendar
>  CMFCore
>  CMFDefault
>  CMFDynamicViewFTI
>  CMFFormController
>  CMFPlacefulWorkflow
>  CMFPlone
>  CMFQuickInstallerTool
>  CMFSetup
>  CMFTopic
>  CMFUid
>  CONTENTS.txt
>  DCWorkflow
>  ExtendedPathIndex
>  ExternalEditor
>  GenericSetup
>  GroupUserFolder
>  kupu
>  Marshall
>  MimetypesRegistry
>  PasswordResetTool
>  PlacelessTranslationService
>  PloneErrorReporting
>  PloneLanguageTool
>  PlonePAS
>  PloneTestCase
>  PloneTranslations
>  PluggableAuthService
>  PasswordResetToolPluginRegistry
>  PortalTransforms
>  README.txt
>  ResourceRegistries
>  SecureMailHost
>  statusmessages
>  validation
>
>  The first time I access the site after completely eliminating Enfold
>  Desktop, I get these two event.log entries:
>
>  ------
>  2008-04-28T14:16:35 WARNING ZODB Could not import class
>  'EnvironmentSuppressAccessRule' from module 'Products.ShellExServer.utils'
>  ------
>  2008-04-28T14:16:35 WARNING ZODB Could not import class 'Normalizer'
>  from module 'Products.ShellExServer.normalize'
>  ------
>
>  At the same time I get *three* of these:
>
>  ------
>  2008-04-28T14:50:32 ERROR root Exception while rendering an error message
>  Traceback (most recent call last):
>    File "/usr/local/Zope-2.9.7/lib/python/OFS/SimpleItem.py", line 223,
>  in raise_standardErrorMessage
>      v = s(**kwargs)
>    File
>  "/usr/local/Zope-2.9.7/lib/python/Shared/DC/Scripts/Bindings.py", line
>  311, in __call__
>      return self._bindAndExec(args, kw, None)
>    File
>  "/usr/local/Zope-2.9.7/lib/python/Shared/DC/Scripts/Bindings.py", line
>  348, in _bindAndExec
>      return self._exec(bound_data, args, kw)
>    File
>  "/usr/local/Zope-2.9.7/lib/python/Products/PythonScripts/PythonScript.py",
>  line 326, in _exec
>      result = f(*args, **kw)
>    File "Script (Python)", line 1, in standard_error_message
>    File "/usr/local/Zope-2.9.7/lib/python/AccessControl/ZopeGuards.py",
>  line 286, in guarded_import
>      raise ImportError, 'import of "%s" is unauthorized' % mname
>  ImportError: import of "Products.ShellExServer.utils" is unauthorized
>  ------
>
>  And then on *every* page access I get *several* of the following:
>
>  ------
>  2008-04-28T14:16:37 ERROR MultiHook '__before_publishing_traverse__'
>  call <EnvironmentSuppressAccessRule at broken> failed.
>  Traceback (most recent call last):
>    File "/usr/local/Zope-2.9.7/lib/python/ZPublisher/BeforeTraverse.py",
>  line 104, in __call__
>      cob(container, request)
>  TypeError: 'EnvironmentSuppressAccessRule' object is not callable
>  ------
>
>  So, I'm wondering, why am I still getting references to ShellExServer
>  modules and classes after uninstalling and removing ShellExServer? Was
>  something monkey patched when I installed ShellExServer? How am I
>  getting out of this forest?
>
>  --
>  Sincerely,
>
>  Chris Calloway
>  http://www.secoora.org
>  office: 332 Chapman Hall   phone: (919) 599-3530
>  mail: Campus Box #3300, UNC-CH, Chapel Hill, NC 27599
>
>
>
>  _______________________________________________
>  Community-desktop mailing list
>  Community-desktop at lists.enfoldsystems.com
>  http://lists.enfoldsystems.com/mailman/listinfo/community-desktop
>



-- 
Sidnei da Silva
Enfold Systems                http://enfoldsystems.com
Fax +1 832 201 8856     Office +1 713 942 2377 Ext 214


From cbc at unc.edu  Mon Apr 28 16:38:42 2008
From: cbc at unc.edu (Chris Calloway)
Date: Mon, 28 Apr 2008 17:38:42 -0400
Subject: [Community-desktop] Error artifacts left after uninstall of
 Enfold Desktop
In-Reply-To: <a7a2b76b0804281309s8c3e445m1b65381a780b9637@mail.gmail.com>
References: <481623C9.8050606@unc.edu>
	<a7a2b76b0804281309s8c3e445m1b65381a780b9637@mail.gmail.com>
Message-ID: <481643E2.9050205@unc.edu>

On 4/28/2008 4:09 PM, Sidnei da Silva wrote:
> Doesn't look like you did uninstall ShellExServer before removing it
> from the products directory. *OR* it could be a uninstall bug that we
> fixed after r6461.

Please accept my word that I did indeed uninstall Desktop Server 
products in Plone, stopped Zope, and removed the directories from 
Products in that order as described in my more recent email to this 
list. I didn't start installing or uninstalling Plone products yesterday 
and full well know the consequences of removing a product's directory 
before uninstalling a product.

Is there an uninstall bug in ED 3.0.0 fixed after r6461? I just went to 
enfoldsystems.com to download whatever the latest E